Which of the following processes would allow the detection of alternative splicing of transcripts from a given gene?

#Question id: 14282

#Part-A Aptitude & General Biotechnology

#Question id: 14283

#Part-B Specialized Branches in Biotechnology

#Question id: 14283

#Part-A Aptitude & General Biotechnology

#Question id: 14318

#Part-B Specialized Branches in Biotechnology

system for manufacture of single-cell protein is Methylophilus methylotrophus. This organism is produced aerobically from methanol with ammonia as nitrogen source. The molecular formula for the biomass is CH _1.680_0.36N_0.22; these cells contain 6% ash. If the actual yield of biomass from methanol is 42% the thermodynamic maximum, what is the oxygen demand?

#Question id: 14331

#Part-B Specialized Branches in Biotechnology

To ensure turbulent conditions and minimum mixing time during agitation with a turbine impeller, the Reynolds number must be at least 10⁴. A stirred laboratory-scale fermenter with a turbine impeller 5 cm in diameter is operated at 800 rpm. If the density of broth being stirred is close to that of water, what is the upper limit for viscosity of the suspension if adequate mixing is to be maintained?

#Question id: 14332

#Part-B Specialized Branches in Biotechnology

To ensure turbulent conditions and minimum mixing time during agitation with a turbine impeller, the Reynolds number must be at least 10⁴. A stirred laboratory-scale fermenter with a turbine impeller 5 cm in diameter is operated at 800 rpm. If the density of broth being stirred is close to that of water. The mixing system is scaled up so the tank and impeller are 15 times the diameter of the laboratory equipment. The stirrer in the large vessel is operated so that the stirrer tip speed (tip speed = π N i D i) is the same as in the laboratory apparatus. How does scale-up affect the maximum viscosity.