TLS Online TPP Program

#Question id: 14141


Which of the following statement is correct about Local alignment?

#Section 7: Recombinant DNA technology and Other Tools in Biotechnology
  1. Local alignment can be used for aligning more divergent sequences.
  2. In local alignment, the two sequences to be aligned can be of different lengths.
  3. local alignment is based on the Smith–Waterman algorithm.
  4. All of the above
More Questions
TLS Online TPP Program

#Question id: 14626

#Section 5: Bioprocess Engineering and Process Biotechnology

A bacterial fermentation was carried out in a reactor containing broth with average density 1200 kg/m3 and viscosity 0.02 N.s/m2 . The broth was agitated at 90 rpm and air was introduced through the sparger at a flow rate of 0.4 vvm. The fermenter was equipped with two sets of flat blade turbine impellers and four baffles. The dimensions of vessel, impellers and baffle width were: tank diameter, Dt =4 m; impeller diameter, Di = 2 m; baffle width, Wb = 0.4 m; also, the liquid depth was H = 6.5 m 
Determine ungassed power, P; 

TLS Online TPP Program

#Question id: 14627

#Section 5: Bioprocess Engineering and Process Biotechnology

In a batch production of penicillin, 40 m3 capacity of the plant, sterile air is required to be supplied. The bioreactor requires 1 vvm (volume of air/volume of broth. min). The incoming air contains 3000 cells/m3of air, for 100 hours operation. Calculate the depth of filter if the penetration of bacteria is 1 in 1 million. 

TLS Online TPP Program

#Question id: 14628

#Section 5: Bioprocess Engineering and Process Biotechnology

Microbial cells are separated from a culture broth at a flow rate of 3.35 x10-3m3/5. Assume the cells are spherical with average diameter of 111m. Select a centrifuge that can perform this separation. Given data: pcell =1.1, Pwater,=997 kgm-1 at 25 °C; Pbroth = 3pwater, and the viscosity of water is 0.9 x 10-3 N.s/m2 

TLS Online TPP Program

#Question id: 14629

#Section 5: Bioprocess Engineering and Process Biotechnology

Microbial cell recovery is carried out in a continuous disc-stack centrifuge. The centrifuge is operated at 5000 rpm for separation of baker's yeast. At a feed rate of 60 1/min, 50% of the cells are recovered. At constant speed, solid recovery is inversely proportional to flow rate. What flow rate is required to recover 90% of cells if the centrifuge speed is fixed at 5000 rpm? 

TLS Online TPP Program

#Question id: 14630

#Section 1: Engineering Mathematics

The series whose nth term is sin 1/n is

TLS Online TPP Program

#Question id: 14631

#Section 1: Engineering Mathematics

The series