TLS Online TPP Program
More Questions
TLS Online TPP Program
#Question id: 14427
#Section 5: Bioprocess Engineering and Process Biotechnology
In which of the following controllers, the performance will improve with time?
TLS Online TPP Program
#Question id: 14428
#Section 5: Bioprocess Engineering and Process Biotechnology
The sensor, which is an integral part of fermentation equipment, the measured value cannot used directly for control. this type of controlling system is called
TLS Online TPP Program
#Question id: 14429
#Section 5: Bioprocess Engineering and Process Biotechnology
Which one of the following constants is represented by Kp?
TLS Online TPP Program
#Question id: 14430
#Section 5: Bioprocess Engineering and Process Biotechnology
Which is not correctly match, effect of process variables on mass transfer characteristics?
Process variable mass transfer characteristics
P. P/V - oxygen transfer rate
q. Impeller tip speed - mixing time
r. Reynolds - number shear rate
TLS Online TPP Program
#Question id: 14431
#Section 5: Bioprocess Engineering and Process Biotechnology
the centrifugal separation of biomass of 80um sized cells of density 1.04kgm^-3 was carried out in a tubular centrifuge having a diameter of 15cm and rotating at 1200 rev/min. calculate the residence time if distance between the liquid surface and the axis of rotation was 0.8cm, the liquid viscosity were 1.0kgm^-3 and 0.013 gcm^-ls-1respectively.
TLS Online TPP Program
#Question id: 14432
#Section 5: Bioprocess Engineering and Process Biotechnology
the centrifugal separation of biomass of 80um sized cells of density 1.04kgm^-3 was carried out in a tubular centrifuge having a diameter of 15cm and rotating at 1200 rev/min. the axis of rotation was 0.8cm, the liquid viscosity were 1.0kgm^-3 and 0.013 gcm-ls^-1 respectively. Calculate the volumetric capacity of the centrifuge if its length was 40cm?