TLS Online TPP Program

#Question id: 16006


Which of the following is incorrect?

#SCPH05 I Biotechnology
  1. Established cell lines (ECL) have short doubling time
  2. ECL are invariably aneuploid
  3. ECL grow in higher density
  4. ECL do not show much evidence of spatial orientation
More Questions
TLS Online TPP Program

#Question id: 14310

#SCPH05 I Biotechnology

Glucose is converted to ethanol by immobilized yeast cells entrapped in gel beads. The specific rate of ethanol production is: qP = 0.2 g ethanol/g-cell-h. The effectiveness factor for an average bead is 0.8. Each bead contains 50 g/L of cells. The voids volume in the column is 40%. Assume growth is negligible (all glucose is converted into ethanol). The feed flow rate is F = 400 l/h and glucose concentration in the feed is S0i = 150 g glucose/l. The diameter of the column is 1 m and the yield coefficient is about 0.49 g ethanol/g glucose. The column height is 4 m. What is the ethanol concentration in the exit stream?

________________

TLS Online TPP Program

#Question id: 14311

#SCPH05 I Biotechnology

Consider following fig, which applies to a fed-batch system.

                           

Assume at t = 0, V = 100 l, X = 2 g/l, m = 1 h-1 , S0 = 4 g/l, and S = 0.01 g/l. V is increased at a constant rate such that dV/dt = 20 l/h = F (or flow rate) and X is constant at all times. What is µ at t = 5 h?

TLS Online TPP Program

#Question id: 14312

#SCPH05 I Biotechnology

An industrial waste-water stream is fed to a stirred-tank reactor continuously and the cells are recycled back to the reactor from the bottom of the sedimentation tank placed after the reactor. The following are given for the system: F = 100 l/h; S0 = 5000 mg/l; mm = 0.25 h-1 ; Ks = 200 mg/l; α (recycle ratio) = 0.6; C (cell concentration factor) = 2; Y M X/S = 0.4. The effluent concentration is desired to be 100 mg/l.  Determine the required reactor volume.

______________

TLS Online TPP Program

#Question id: 14312

#SCPH05 I Biotechnology

An industrial waste-water stream is fed to a stirred-tank reactor continuously and the cells are recycled back to the reactor from the bottom of the sedimentation tank placed after the reactor. The following are given for the system: F = 100 l/h; S0 = 5000 mg/l; mm = 0.25 h-1 ; Ks = 200 mg/l; α (recycle ratio) = 0.6; C (cell concentration factor) = 2; Y M X/S = 0.4. The effluent concentration is desired to be 100 mg/l.  Determine the required reactor volume.

______________

TLS Online TPP Program

#Question id: 14313

#SCPH05 I Biotechnology

An industrial waste-water stream is fed to a stirred-tank reactor continuously and the cells are recycled back to the reactor from the bottom of the sedimentation tank placed after the reactor. The following are given for the system: F = 100 l/h; S0 = 5000 mg/l; mm = 0.25 h-1 ; Ks = 200 mg/l; α (recycle ratio) = 0.6; C (cell concentration factor) = 2; Y M X/S = 0.4. The effluent concentration is desired to be 100 mg/l.  Determine the cell concentration in the reactor and in the recycle stream.

_____________

TLS Online TPP Program

#Question id: 14313

#SCPH05 I Biotechnology

An industrial waste-water stream is fed to a stirred-tank reactor continuously and the cells are recycled back to the reactor from the bottom of the sedimentation tank placed after the reactor. The following are given for the system: F = 100 l/h; S0 = 5000 mg/l; mm = 0.25 h-1 ; Ks = 200 mg/l; α (recycle ratio) = 0.6; C (cell concentration factor) = 2; Y M X/S = 0.4. The effluent concentration is desired to be 100 mg/l.  Determine the cell concentration in the reactor and in the recycle stream.

_____________