TLS Online TPP Program
More Questions
TLS Online TPP Program
#Question id: 14429
#Section 5: Bioprocess Engineering and Process Biotechnology
Which one of the following constants is represented by Kp?
TLS Online TPP Program
#Question id: 14430
#Section 5: Bioprocess Engineering and Process Biotechnology
Which is not correctly match, effect of process variables on mass transfer characteristics?
Process variable mass transfer characteristics
P. P/V - oxygen transfer rate
q. Impeller tip speed - mixing time
r. Reynolds - number shear rate
TLS Online TPP Program
#Question id: 14431
#Section 5: Bioprocess Engineering and Process Biotechnology
the centrifugal separation of biomass of 80um sized cells of density 1.04kgm^-3 was carried out in a tubular centrifuge having a diameter of 15cm and rotating at 1200 rev/min. calculate the residence time if distance between the liquid surface and the axis of rotation was 0.8cm, the liquid viscosity were 1.0kgm^-3 and 0.013 gcm^-ls-1respectively.
TLS Online TPP Program
#Question id: 14432
#Section 5: Bioprocess Engineering and Process Biotechnology
the centrifugal separation of biomass of 80um sized cells of density 1.04kgm^-3 was carried out in a tubular centrifuge having a diameter of 15cm and rotating at 1200 rev/min. the axis of rotation was 0.8cm, the liquid viscosity were 1.0kgm^-3 and 0.013 gcm-ls^-1 respectively. Calculate the volumetric capacity of the centrifuge if its length was 40cm?
TLS Online TPP Program
#Question id: 14433
#Section 5: Bioprocess Engineering and Process Biotechnology
the centrifugal separation of biomass of 80um sized cells of density 1.04kgm^-3 was carried out in a tubular centrifuge having a diameter of 15cm and rotating at 1200 rev/min. the axis of rotation was 0.8cm, the liquid viscosity were 1.0kgm-3 and 0.013 gcm-^ls^-1 respectively. centrifuge length is 40cm, calculate the factor?
TLS Online TPP Program
#Question id: 14434
#Section 5: Bioprocess Engineering and Process Biotechnology
the centrifugal separation of biomass of 80um sized cells of density 1.04kgm-3 was carried out in a tubular centrifuge having a diameter of 15cm and rotating at 1200 rev/min. the axis of rotation was 0.8cm, the liquid viscosity was 1.0kgm-3 and 0.013 gcm-ls-1 respectively. centrifuge length is 40cm, what will be the time required for centrifuging 1000 litres of broth?