TLS Online TPP Program

#Question id: 14333


A cylindrical bioreactor of diameter 3 m has four baffles. A Rushton turbine mounted in the reactor has a diameter one third the tank diameter and is operated at a speed of 90 rpm. The density of the fluid is approximately I g cm-3. The reactor is used to culture an anaerobic organism that does not require gas sparging. The broth can be assumed Newtonian. As the cells grow, the viscosity of the broth increases. when the viscosity is 1000 times greater than water, estimate the power required to achieve turbulence.

#Section 5: Bioprocess Engineering and Process Biotechnology
  1. 7.8 ×104 kw
  2. 9.80×103 kw  
  3. 5.80×103 kw
  4. 5.0×103 kw
More Questions
TLS Online TPP Program

#Question id: 27520

#Section 5: Bioprocess Engineering and Process Biotechnology

In the air filter, the particles removal due to drag force

TLS Online TPP Program

#Question id: 27521

#Section 5: Bioprocess Engineering and Process Biotechnology

In the figure below, '1', '2' and '3' stand for

TLS Online TPP Program

#Question id: 27558

#Section 5: Bioprocess Engineering and Process Biotechnology

10 kg of a pure enzyme (Mr 30 000) catalyses the conversion of 1.5 g of a substrate (Mr 44) to products in 5 minutes. What will be the turnover number in (sec^-1)  ....10^5

TLS Online TPP Program

#Question id: 27562

#Section 5: Bioprocess Engineering and Process Biotechnology

Match each parameter in Group 1 with the appropriate measuring device in Group 2

 Group 1 Group 2
 (P) Pressure (1) Photometer
 (Q) Foam (2) Rotameter
 (R) Turbidity (3) Diaphragm gauge
 (S) Flow rate (4) Rubber sheathed electrode 

TLS Online TPP Program

#Question id: 27563

#Section 5: Bioprocess Engineering and Process Biotechnology

Match the instruments in Group 1 with their corresponding measurements in Group 2

 Group 1 Group 2
 (P) Manometer (1) Agitator speed
 (Q) Rotameter (2) Pressure difference 
 (R) Tachometer (3) Cell number
 (S) Haemocytometer (4) Air flow rate

TLS Online TPP Program

#Question id: 27589

#Section 5: Bioprocess Engineering and Process Biotechnology

The pressure gauge on an autoclave reads 15 psi. What is the absolute pressure in the chamber in psi? (Assume atmospheric pressure is 14.7 psi)