Which is an example of a study that might be done by a transmission geneticist?

#Question id: 14189

#Section 5: Bioprocess Engineering and Process Biotechnology

Aerobic degradation of an organic compound by a mixed culture of organisms in waste water can be represented by the following reaction

     C₃H₆O₃ + a O₂ + b NH₃ → c C₅H₇NO₂ + d H₂O + e CO₂          

Determine the degree of reductions for bacteria.

#Question id: 14190

#Section 5: Bioprocess Engineering and Process Biotechnology

Aerobic degradation of an organic compound by a mixed culture of organisms in waste water can be represented by the following reaction

Determine RQ for the organisms

________________

#Question id: 14191

#Section 5: Bioprocess Engineering and Process Biotechnology

Consider a 1000-l CSTR in which biomass is being produced with glucose as the substrate. The microbial system follows a Monod relationship withn µ_m = 0.4 h^-1 , K_S = 1.5 g/l (an unusu ally high value), and the yield factor Y_X/S = 0.5 g biomass/g substrate consumed. If normal operation is with a sterile feed containing 10 g/l glucose at a rate of 100 l/h. What is the specific biomass production rate (g/l-h) at steady state?

_____________________

#Question id: 14192

#Section 5: Bioprocess Engineering and Process Biotechnology

In a two-stage chemostat system, the volumes of the first and second reactors are V₁ = 500 l and V₂ = 300 l, respectively. The first reactor is used for biomass production and the second is for a secondary metabolite formation. The feed flow rate to the first reactor is F = 100 l/h, and the glucose concentration in the feed is S = 5.0 g/l. Use the following constants for the cells.

Determine cell concentration in the effluent of the first stage.

      _______________

#Question id: 14193

#Section 5: Bioprocess Engineering and Process Biotechnology

In a two-stage chemostat system, the volumes of the first and second reactors are V₁ = 500 l and V₂ = 300 l, respectively. The first reactor is used for biomass production and the second is for a secondary metabolite formation. The feed flow rate to the first reactor is F = 100 l/h, and the glucose concentration in the feed is S = 5.0 g/l. Use the following constants for the cells.

Determine glucose concentration in the effluent of the first stage. _____________________