Hydrolysis of 1 M glucose 6-phosphate catalyzed by glucose 6-phosphatase is 99% complete at equilibrium (i.e., only 1% of the substrate remains). Which of the following statements is most nearly correct? (R = 8.315 J/mol·K; T = 298 K)

#Question id: 14294

#Section 5: Bioprocess Engineering and Process Biotechnology

#Question id: 14295

#Section 5: Bioprocess Engineering and Process Biotechnology

Pseudomonas methylotrophus is used to produce single-cell protein from methanol in a 1000 m³ pressure-cycle airlift fermenter. The biomass yield from substrate is 0.41 g g^{- 1}, K_S is 0.7 mg l^{- 1}, and the maximum specific growth rate is 0.44 h^{- 1}. The medium contains 4% (w/v) methanol. A substrate conversion of 98% is desirable. The reactor may be operated either in batch or continuous mode. If operated in batch, an inoculum of 0.01% (w/v) is used and the downtime between batches is 20 h. If operated continuously, a downtime of 25 d is expected per year. Neglecting maintenance requirements, compare the annual biomass production from batch and continuous reactors?

                             _________________

#Question id: 14296

#Section 5: Bioprocess Engineering and Process Biotechnology

A two-stage chemostat system is used for production of secondary metabolite. The volume of each reactor is 0.5 m³; the flow rate of feed is 50 l h^{- 1}. Mycelial growth occurs in the first reactor; the second reactor is used for product synthesis. The concentration of substrate in the feed is 10 gl^-1. Kinetic and yield parameters for the organism are:

Assume that product synthesis is negligible in the first reactor and growth is negligible in the second reactor. Determine cell concentrations entering the second reactor.

#Question id: 14297

#Section 5: Bioprocess Engineering and Process Biotechnology

A two-stage chemostat system is used for production of secondary metabolite. The volume of each reactor is 0.5 m³; the flow rate of feed is 50 l h^{- 1}. Mycelial growth occurs in the first reactor; the second reactor is used for product synthesis. The concentration of substrate in the feed is 10 gl^-1. Kinetic and yield parameters for the organism are:

Assume that product synthesis is negligible in the first reactor and growth is negligible in the second reactor. Determine substrate concentrations entering the second reactor.