TLS Online TPP Program

#Question id: 14597


Which is true of simple diffusion of water?

#Section 2: General Biology
  1. Water usually exits a cell and produces a tremendous osmotic pressure.
  2. Water usually leaves the cell and produces negative osmotic pressure
  3. Water tends to enter and leave the cell equally, resulting in no pressure in the cell.
  4. Water usually enters a cell and produces a tremendous osmotic pressure AND the diffusion ultimately relies on the selectively permeable nature of the cell membrane.
More Questions
TLS Online TPP Program

#Question id: 14283

#Section 5: Bioprocess Engineering and Process Biotechnology

Aeration ina fermenter is expressed as VVM. What will be the VVM if air is sparged at 2000 L/min with a working volume 10 m^3? 

TLS Online TPP Program

#Question id: 14284

#Section 5: Bioprocess Engineering and Process Biotechnology

The specific productivity (qp) of an enzyme production Is fitted linearly with specific growth rate p of a fungal organism according to the equation The estimated values of constants alpha and beta are 0.0006 and 25 respectively. The enzyme production kinetics is 

TLS Online TPP Program

#Question id: 14285

#Section 5: Bioprocess Engineering and Process Biotechnology

Match the transport process with appropriate time constants given below 

Transport ProcessTime Constants
1. Oxygen transferp. V/Q
2. Heat transferq. 4V(1.5ND3)
3. Flowr. VpCp/UA
4. Mixings. 1/KLa 

TLS Online TPP Program

#Question id: 14286

#Section 5: Bioprocess Engineering and Process Biotechnology

 When a liquid of density 1200kg/m3 and viscosity 0.01 kg m^-1s^-1 flows through a 1 cm ID pipe at 0.2m/s, the flow is referred as a 

TLS Online TPP Program

#Question id: 14287

#Section 5: Bioprocess Engineering and Process Biotechnology

A chemostat is run with a feed rate of llitre/h when the volume of the reactor is also 1 litre. At steady state the doubling time of the cells in the chemostat is.....   h. 

TLS Online TPP Program

#Question id: 14288

#Section 5: Bioprocess Engineering and Process Biotechnology

During a batch culture experiment the following data was obtained 

What will be the product yield (g) per gram of substrates?