The difference between the set points and the measured signal is known as ______________?

TLS Online TPP Program

#Question id: 27589

#Section 5: Bioprocess Engineering and Process Biotechnology

The pressure gauge on an autoclave reads 15 psi. What is the absolute pressure in the chamber in psi? (Assume atmospheric pressure is 14.7 psi)

TLS Online TPP Program

#Question id: 27590

#Section 5: Bioprocess Engineering and Process Biotechnology

The pressure gauge on an autoclave reads 15 psi. What is the absolute pressure in the chamber in atm? (Assume atmospheric pressure is 14.7 psi and 1 psi=6.8*10-2 atm

TLS Online TPP Program

#Question id: 27591

#Section 5: Bioprocess Engineering and Process Biotechnology

Gas leaving a fermenter at close to 1 atm pressure and 25°C has the following composition: 78.2% nitrogen, 19.2% oxygen, 2.6% carbon dioxide. Calculate the mass composition of the fermenter off-gas.

TLS Online TPP Program

#Question id: 27592

#Section 5: Bioprocess Engineering and Process Biotechnology

Gas leaving a fermenter at close to 1 atm pressure and 25°C has the following composition: 78.2% nitrogen, 19.2% oxygen, 2.6% carbon dioxide. Calculate the mass of CO2 in each cubic metre of gas leaving the fermenter. [R=0.000082057 m3 atm / K gmol]

TLS Online TPP Program

#Question id: 27593

#Section 5: Bioprocess Engineering and Process Biotechnology

The specific gravity of ethanol is 〖𝟎.𝟕𝟖𝟗〗_"4°C " ^"20°C"  . What is its density at 20°C in kg m-

TLS Online TPP Program

#Question id: 27594

#Section 5: Bioprocess Engineering and Process Biotechnology

In a process the inputs and outputs are shown as in the diagram.

Correct material balance is