Practice Questions

TLS Online TPP Program

#Question id: 12908

Which statement is incorrect about CRISPR?

#Section 7: Recombinant DNA technology and Other Tools in Biotechnology

It was first identified as an adaptive immunity pathway in prokaryotes providing resistance to bacteriophage and analogous to the RNA interference process found in eukaryotes.
It does not utilize double-stranded sequence-specific breaks and does not repair using HDR via homologous recombination.
The system consists of two parts, a short synthetic guide RNA ( gRNA) and a nonspecific double-stranded endonuclease termed Cas9.
It is also possible to program Cas9 with multiple guide RNAs to allow multiplex site-specific editing for designing large deletions, inversions and translocations.

More Questions

TLS Online TPP Program

#Question id: 14259

#Section 5: Bioprocess Engineering and Process Biotechnology

C. roseus cells immobilized in Ca-alginate beads of diameter 0.5 mm are used for production of indole alkaloids (IA) in a fluidized-bed bioreactor. The rate limiting nutrient is glucose and no intraparticle diffusion limitations exist. Use the following data: Flow rate of the feed: Q = 1 l/h, Glucose in the feed: So = 30 g/l, Plant Cell Concentration: X = 6 g/l reac. The rate constant for IA formation: k = 5 d-1 (g/l)^-1 Ks = 0.4 g/l, Column diameter: Do = 0.15 m. Growth is negligible and Monod kinetics is valid. For 95% glucose conversion determine volume.

TLS Online TPP Program

#Question id: 14260

#Section 5: Bioprocess Engineering and Process Biotechnology

C. roseus cells immobilized in Ca-alginate beads of diameter 0.5 mm are used for production of indole alkaloids (IA) in a fluidized-bed bioreactor. The rate limiting nutrient is glucose and no intraparticle diffusion limitations exist. Use the following data: Flow rate of the feed: Q = 1 l/h, Glucose in the feed: So = 30 g/l, Plant Cell Concentration: X = 6 g/l reac. The rate constant for IA formation: k = 5 d-1 (g/l)^-1 Ks = 0.4 g/l, Column diameter: Do = 0.15 m. Growth is negligible and Monod kinetics is valid. For 95% glucose conversion determine height of the column

TLS Online TPP Program

#Question id: 14261

#Section 5: Bioprocess Engineering and Process Biotechnology

C. roseus cells immobilized in Ca-alginate beads of diameter 0.5 mm are used for production of indole alkaloids (IA) in a fluidized-bed bioreactor. The rate limiting nutrient is glucose and no intraparticle diffusion limitations exist. Use the following data: Flow rate of the feed: Q = 1 l/h, Glucose in the feed: So = 30 g/l, Plant Cell Concentration: X = 6 g/l reac. The rate constant for IA formation: k = 5 d-1 (g/l)^-1 Ks = 0.4 g/l, Column diameter: Do = 0.15 m. Growth is negligible and Monod kinetics is valid. If Yp/s is 0.02 g IA/g glu, determine IA concentration in the effluent.

_______________

TLS Online TPP Program

#Question id: 14262

#Section 5: Bioprocess Engineering and Process Biotechnology

The BOD5 value of a waste-water feed stream to an activated-sludge unit is S0 = 300 mg/l, and the effluent is desired to be S = 30 mg/l. The feed flow rate is F = 2× 10^7 l/day. For the recycle ratio of α = 0.5 and a steady-state biomass concentration of X = 5 g/l, Use the following kinetic parameters:

calculate Required reactor volume (V).

_______________10^6

TLS Online TPP Program

#Question id: 14263

#Section 5: Bioprocess Engineering and Process Biotechnology

The BOD5 value of a waste-water feed stream to an activated-sludge unit is S0 = 300 mg/l, and the effluent is desired to be S = 30 mg/l. The feed flow rate is F = 2× 10^7 l/day. For the recycle ratio of α = 0.5 and a steady-state biomass concentration of X = 5 g/l, Use the following kinetic parameters:

calculate Biomass concentration in recycle (Xr).

TLS Online TPP Program

#Question id: 14264

#Section 5: Bioprocess Engineering and Process Biotechnology

The BOD5 value of a waste-water feed stream to an activated-sludge unit is S0 = 300 mg/l, and the effluent is desired to be S = 30 mg/l. The feed flow rate is F = 2× 10^7 l/day. For the recycle ratio of α = 0.5 and a steady-state biomass concentration of X = 5 g/l, Use the following kinetic parameters:

calculate Hydraulic residence time