The value of the determinant

 

TLS Online TPP Program

#Question id: 15625

#Section 4: Fundamentals of Biological Engineering

A stagnant liquid film of 0.4 mm thickness is held between two parallel plates. The top plate is maintained at 400C and the bottom plate is maintained at 300C. If

the thermal conductivity of the liquid is 0.14 W/(m K), then the steady state heat flux ( W/m²) assuming one-dimensional heat transfer is

TLS Online TPP Program

#Question id: 15626

#Section 4: Fundamentals of Biological Engineering

In a mass transfer system the unit of diffusivity is

TLS Online TPP Program

#Question id: 15627

#Section 4: Fundamentals of Biological Engineering

A fermentation medium is being cooled from 70^0C to 32^0C in a double pipe heat exchanger. Fluid flowing counter currently with this stream in heated from 20^0C

to 46^0C. The log mean temperature difference (in0C) for the two streams is

TLS Online TPP Program

#Question id: 15628

#Section 4: Fundamentals of Biological Engineering

When a liquid of density 1200 kg/m3 and viscosity 0.01 kg m^-1s^-1 flows through a 1 cm Diameter pipe at 0.2 m/s, the flow is referred as a

TLS Online TPP Program

#Question id: 15629

#Section 4: Fundamentals of Biological Engineering

Vortexing in a stirred tank reactor can be prevented by using

TLS Online TPP Program

#Question id: 15630

#Section 7: Recombinant DNA technology and Other Tools in Biotechnology

Which of the following  are the part of heuristic algorithm in multiple sequence alignment?