The presence of 2’-hydroxyls in the RNA backbone prevents RNA from adopting a-

TLS Online TPP Program

#Question id: 14621

#Section 5: Bioprocess Engineering and Process Biotechnology

a chromatographic separation of a two component samples on 50 cm column gave the retention times for the solutes A and B as 2.5 and 3.1 minutes with base widths of the two chromatographic peaks being 0.24 and 0.3 min respectively. Calculate plate height 

TLS Online TPP Program

#Question id: 14622

#Section 2: General Biology

Endospores are

TLS Online TPP Program

#Question id: 14623

#Section 5: Bioprocess Engineering and Process Biotechnology

a chromatographic separation of a two component samples on 50 cm column gave the retention times for the solutes A and B as 2.5 and 3.1 minutes with base widths of the two chromatographic peaks being 0.24 and 0.3 min respectively. Calculate resolution of two peak 

TLS Online TPP Program

#Question id: 14624

#Section 5: Bioprocess Engineering and Process Biotechnology

An enzyme is produced for manufacturing a sun protection lotion. Given kinetic data for the enzyme reaction with v_max= 2.5mmol M^-3 S^-1 Km= 8.9 mM and So = 12 mM, what would be the time required for 95% conversion in a batch bioreactor? 

TLS Online TPP Program

#Question id: 14625

#Section 5: Bioprocess Engineering and Process Biotechnology

Monod kinetics are considered in a CSTR with an organism growing with an initial substrate concentration of 50 g1^-1 and kinetic parameters of Ks = 2 g1^-1 and umax = 0.5 h^-1 . (a) What would be the maximum dilution rate for 100% yield of biomass with maximum rate? 

TLS Online TPP Program

#Question id: 14626

#Section 5: Bioprocess Engineering and Process Biotechnology

A bacterial fermentation was carried out in a reactor containing broth with average density 1200 kg/m³ and viscosity 0.02 N.s/m² . The broth was agitated at 90 rpm and air was introduced through the sparger at a flow rate of 0.4 vvm. The fermenter was equipped with two sets of flat blade turbine impellers and four baffles. The dimensions of vessel, impellers and baffle width were: tank diameter, Dt =4 m; impeller diameter, Di = 2 m; baffle width, Wb = 0.4 m; also, the liquid depth was H = 6.5 m 

Determine ungassed power, P;